eth_watchdog-http-and-snmp-UI-4.4.tar.gz | mtime: 2015-02-15, size: 60793 bytes supported MCUs: atmega328p, atmega644 | unix tape archive, compressed Changes since last version: - update enc28j60.c to the level of eth_tcp_client_server-dhcp-5.9 |
eth_watchdog-http-and-snmp-UI-4.3.tar.gz | mtime: 2014-03-07, size: 60583 bytes supported MCUs: atmega328p, atmega644 | unix tape archive, compressed Changes since last version: - system gets stuck in enc28j60Init if power fluctuates |
eth_watchdog-http-and-snmp-UI-4.2.tar.gz | mtime: 2013-12-17, size: 60267 bytes supported MCUs: atmega328p, atmega644 | unix tape archive, compressed Changes since last version: atmega168 no longer supported due to memory constrains, fix for memory overrun when accessing the cfg page. |
eth_watchdog-http-and-snmp-UI-4.1.tar.gz | mtime: 2011-11-09, size: 60205 bytes supported MCUs: atmega168, atmega328p, atmega644 | unix tape archive, compressed Changes since last version: voltage readings are available over snmp as integer and as string data types |
TUXGRAPHICS-HWD-MIB-4.1.txt | SNMP MIB, text file | Simple Network Management Protocol information structure for watchdog version 4.1 |
eth_watchdog-http-and-snmp-UI-4.0.tar.gz | mtime: 2011-01-29, size: 56444 bytes supported MCUs: atmega168, atmega328p, atmega644 | unix tape archive, compressed Changes since last version: Add SNMP support and voltmeter |
User guide/help file for version 4.x | - - | How to use the ethernet host watchdog (the users guide for the older versions can be found below) |
TUXGRAPHICS-HWD-MIB.txt | SNMP MIB, text file | Simple Network Management Protocol information structure for watchdog version 4.0 |
End of version 4.X, below is version 3.X | ||
eth_rem_dev_network_watchdog-3.1.tar.gz | mtime: 2010-08-28, size: 32155 bytes supported MCUs: atmega168, atmega328p, atmega644 | unix tape archive, compressed Changes since last version: total re-write |
User guide/help file for version 3.x | - - | How to use the ethernet host watchdog (the users guide for the older version is below) |
The above version is a totaly re-written watchdog with different user interface and new settings. The screenshots in the article are form version 2.1x | ||
eth_rem_dev_network_watchdog-2.18.tar.gz | mtime: 2010-08-28, size: 32804 bytes supported MCUs: atmega168, atmega328p, atmega644 | unix tape archive, compressed Changes since last version: bug fix: the hoststatus is not stepped after a failed arp refresh |
eth_rem_dev_network_watchdog-2.17.tar.gz | mtime: 2009-03-11, size: 44020 bytes | unix tape archive, compressed Changes since last version: udates to the README file |
eth_rem_dev_network_watchdog-2.16.tar.gz | mtime: 2009-02-28, size: 43809 bytes | unix tape archive, compressed Changes since last version: enc rev B4 bug fixes and cosmetic code improvements |
eth_rem_dev_network_watchdog-2.15.tar.gz | mtime: 2009-01-01, size: 44106 bytes | unix tape archive, compressed Changes since last version: adaptations for atmega328 chip |
eth_rem_dev_network_watchdog-2.14.tar.gz | mtime: 2008-12-30, size: 94565 bytes | unix tape archive, compressed Changes since last version: Avoid interfrence between ping and web traffic |
eth_rem_dev_network_watchdog-2.13.tar.gz | mtime: 2008-12-12, size: 43923 bytes | unix tape archive, compressed Changes since last version: this is the first version |
User guide/help file for version 2.1x | - - | How to use the ethernet host watchdog |
eth-network-watchdog article for version 4.X | - - | The corresponding documentation describing the ethernet host watchdog 4.X |
eth-network-watchdog article for version 3.x | - - | The corresponding documentation describing the ethernet host watchdog 3.X |