8x1-lcd-ADC-example-1.0.tar.gz | mtime: 2014-12-01, size: 24407 bytes supported MCUs: atmega328p | unix tape archive, compressed Changes since last version: - this is the first version |
config-DVM-firmware-1.2.zip | mtime: 2015-06-20, size: 5144 bytes supported MCUs: atmega328p or atmega328 | HEX file for the "configurable DVM module" firmware zip file, compressed Changes since last version: - initial values for D and M are now 10 - bug fix: incorrect eeprom address for settings causes corrupt values for D on ADC0 Config menu and setup guide for this version |
config-DVM-firmware-1.1.zip | mtime: 2015-02-08, size: 4920 bytes supported MCUs: atmega328p | HEX file for the "configurable DVM module" firmware zip file, compressed Changes since last version: - dual voltmeter (PD0 connected to GND switches channel to ADC1) - bug fix in setup menu |
config-DVM-firmware-1.0.zip | mtime: 2015-01-28, size: 4605 bytes supported MCUs: atmega328p | HEX file for the "configurable DVM module" firmware zip file, compressed Changes since last version: - this is the first version Config menu and setup guide for this version |
Article: Programmable 8-character LCD module and digital voltmeter | - - | The corresponding documentation |