home |  electronics |  toolbox |  science club |  tuxtalk |  photos |  e-cards |  online-shop



October 2024

Mason jar fermentation with standard lids

I used to make sauerkraut in a large ceramic crock pot. Several cabbage heads fit into one pot and this is a good method to preserve large amounts of cabbage harvested in the fall.

Today long term preservation is not a major concern anymore. Cabbage has its lowest price around October but it is possible to buy it year round. Fermented cabbage keeps ageing and changes its taste over time. It becomes more sour as time goes on. Everybody loves sauerkraut in November/December but what is left of it in May is not so much appreciated anymore. It's over-fermented, quite soft and too sour.

I find it now much better to ferment small quantities in mason jars (quart jars, 1L jars). This way you have freshly made sauerkraut and you can also try different varieties (red cabbage, red beets, baladi cabbage aka flat cabbage, white cabbage, ...).

If you google "mason jar fermentation" then you will find all kinds of special tools and lids that you "need" for fermentation. THIS IS A SCAM. You don't need anything special.

The key point about successful and safe fermentation is: No oxygen. The lactic acid bacteria responsible for the fermentation of cabbage are anaerobic. You have to create conditions where those bacteria thrive and they will keep fungi, yeast or other bacteria out:

  1. Salt: use a brine with 1% to 3% salt (by weight, e.g 2g salt in 100ml of water makes a 2% brine). Salt suppresses the growth of yeast but lactic acid bacteria are more tolerant to salt than yeasts. In other words: without salt we might end up with some sort of vegetable beer or wine but by adding salt we encourage the lactobacillus fermentation.
  2. No oxygen: mold and fungi need oxygen. Lactobacillus is anaerobic. Oxygen can also be dissolved in water. This is why fish can live in water. To make the brine for fermentation you should use previously boiled water. The boiling is not primarily needed to sterilize the water but to reduce the amount of dissolved gases such as chlorine and oxygen. Note that the water needs to be at room temperature when you add it to the shredded cabbage. In other words: bring water to a rolling boil and then let it cool down to room temperature.
  3. Fill the jar to the top to keep air out.
  4. Have some sort of valve to allow gases (mostly CO2) and brine to escape from the jar without letting oxygen in.

If you pay attention to those simple point then you will never ever have a failed fermentation and there will never be any mold in the jar.

A normal flat mason jar lid with a weight on top can function as a perfect valve. I just use a glass of water as the weight on top. Gasses can form under the lid and after enough pressure has built up it will lift the lid a tiny bit and the gasses can escape. The weight on top ensures that the lid closes immediately after the gasses have escaped. This works perfectly and you do not need anything other than a glass of water:

Remove the ring during fermentation and put a weight on top to have the lid function as a valve
Remove the ring during fermentation and put a weight on top to have the lid function as a valve (this jar contains red beets + red cabbage)
Water glass as a weight on top of the lid
A water glass as a weight on top of the lid makes a perfect valve to allow brine and gasses to escape without letting air in


I use also old Canadian crown jars for fermentation. These jars have a glass lid with a rubber seal. The lactic acid generated during fermentation can be quite corrosive in combination with the salt in the brine. Glass and rubber are more inert than the modern mason jar metal lids. Modern metal lids are painted on the inside to make them corrosion resistant but they might start to corrode at the edges and you will probably need to replace the lid after a while (about 5 to 10 fermentation cycles). The lids are cheap but those old Canadian crown jars can be re-used indefinitely. This is how it works:

vintage crown canning jar from 1950
Vintage crown canning jar from 1950, made by Dominion Glass of Montreal
Dominion Glass Co. of Montreal in 1890, view from Papineau Street, not far from today's Jaques Cartier bride
Dominion Glass Co. of Montreal in 1890, view from Papineau Street, not far from today's Jaques Cartier bride, source: https://collections.banq.qc.ca/ark:/52327/2082128
Dominion Glass, add from 1915
Dominion Glass, add from 1915
Remove the metal ring during fermentation process
Remove the metal ring during the fermentation while brine is spilling out
A glass filled with some water makes a pefect weight. This results in the lid functioning as a valve
A glass filled with some water makes a perfect weight. This results in the glass lid functioning as a valve

Vintage Canadian Crown jars can be re-used indefinitely because the glass lids will never corrode. Regular modern tin lids start to corrode from the edges after a few uses. In some cases there is a tiny scratch in the paint on the inside of the lid and then they will start to corrode there. On average I have been able to re-use modern lids 5 to 10 times. There is however also a modern mason jar lid known as "Tattler lid" that can be re-used indefinitely. It's a plastic lid with a rubber seal:

Tattler mason jar lids
Tattler mason jar lids. These lids do not corrode in the presence of lactic acid and salt brine.

Mason jar fermentation recipe

Steps to ferment cabbage into sauerkraut:

  1. Use a large mason jar. I do not use jars smaller than a pint (16oz, about 1/2 liter). The old Canadian Crown jars were made by Dominion Glass of Montreal and they are quart jars (1 quart = 32 fluid ounce = 946ml = just under 1 liter). A Canadian Bernardin 1L jar or an american 1 quart Ball jar will work as well. I find that 1 quart (about 1L) is the perfect size.
  2. Prepare a salt brine: Bring water to a rolling boil, leave it in the pot and let it cool down to room temperature. This does not only sterilize the water it reduces also the amount of dissolved chlorine gas and oxygen gas from the water. Both elemental chlorine gas and oxygen gas are toxic to lactobacillus bacteria and we need to remove them to allow lactobacillus to thrive. Add 2 gram of salt per 100 gram (=100ml) of water. This makes a 2% brine. Any salt works.
  3. Use a cabbage shredder or a knife to slice the cabbage.
  4. Lightly salt the sliced cabbage.
  5. Pack the jar with the cabbage.
  6. Add some of the brine (prepared in step 2).
  7. Pound and compact the cabbage and make sure that the spaces between the shredded cabbage are filled with brine.
  8. Leave about 1 inch (2.54cm) of space at the top, fill this space with something: I use pebbles collected at the beach or a raw wood block (not treated or painted wood). This is to keep the cabbage as much as possible submerged in brine. If you use small stone pebbles then make sure they are inert to the acid that forms during fermentation. Quartz pebbles or granite pebbles work well. Any kind of sediment stone or porous stone should be avoided.
  9. Fill the jar to the top with brine and cover the pebbles or the wood block until the jar overflows. Put the lid without the ring on the jar. Put a glass filled with water on top of the lid to weigh it down.
  10. Set the whole jar (with the water glass weight on top) into a bowl. Some of the brine will overflow as gasses form. Don't try to account for the volume expansion by leave an air gap in the jar. Remember that you want to keep any oxygen out.
  11. Temperature influences taste and fermentation speed. I find that the best results are obtained at 16'C to 18'C. I use the unheated garage or a cool corner in the basement.


It is possible to buy expensive glass fermentation weights. This is again totally unnecessary. Granite pebbles, a raw wood block or half an onion work just fine.

Granite pebbles or a wood block can be used to keep the cabbage submerged
Granite pebbles or a wood block can be used to keep the cabbage submerged
Mason jar with a wood block to keep the cabbage submerged in brine
Mason jar with a wood block to keep the cabbage submerged in brine. The lid and the weight on top of the lid will push the wood block down.


After about 3 days you will see maximum fermentation activity and it will die down around day 5. Brine will overflow and it's important to have the jar in a bowl. This will become somewhat messy as more brine flows out so be prepared. If you have some red cabbage in the jar then you will also notice on day 4-5 a significant change in color. Shredded red cabbage is initially blue-purple and it turns pink-red as lactic acid is formed during the fermentation process.

Red cabbage changes its color as the PH-value changes. It's first purple/blue and then pink/red as the environment become more acidic
Jar on the left: a mixture of red and white cabbage, mostly white cabbage, just started. Jar on the right: a mixture of red and white cabbage, mostly red cabbage, day 6. Red cabbage changes its color as the PH-value changes. It's first purple/blue and then pink/red as the environment become more acidic. You can see that the cabbage on the right is ready because it's pink


It takes about 7 to 14 days until the sauerkraut is ready. You can keep it then for several weeks. Just remove the weight from the top of the lid and put the ring on to close the jar. Don't open the lid (remember: no oxygen, the presence of oxygen causes mold). Wipe the jar clean on the outside. It will keep unrefrigerated for several weeks but it will continue to ripen. Put it in the fridge if you do not want it to ripen further.

Enjoy!

Fermentation myth and mistakes

Packing and compacting

It's a good idea to pound sliced cabbage a bit as this gets the juices out and allows the lactic acid bacteria to thrive. You can cut yourself a small wooden pounder stick as shown below or you can buy one.

Put a little bit of brine into the jar prior to adding the cabbage. This ensures that all the air can rise and get out prior to packing and compacting. If you don't do this then you might end up with some trapped air at the bottom of the jar. If you still have air bubbles after topping the jar up with brine then you can try to release them by pushing a chop stick down into the jar.

Wooden cabbage pounder
Wooden cabbage pounder. It's not straight because the human hand is actually not straight. This kind of shape makes it very comfortable to hold the stick.

Monitoring the fermentation progress

How fast the fermentation progresses depends not only on the temperature but also on the type of vegetable that you ferment. Shredded cabbage has a big surface area and it's the easiest fermentation that you can do. It will progress very quickly:


Cucumbers or carrots have a much smaller surface area than shredded cabbage and the fermentation will take longer.

Fermentation ideas

You can use different types of cabbage or use spices. Here are some ideas:


Note that you need to add more salt than usual when fermenting carrots or potatoes alone as they contain a lot of suggar and starch. Without the extra salt you are likely to get some kind of cider instead of lacto fermentation.

Cabbage types that I use:

Red cabbage
Red cabbage
Baladi cabbage aka flat cabbage, this is in my opinion the best cabbage for fermentation as it is cruncy and juicy
Baladi cabbage aka flat cabbage, this is in my opinion the best cabbage for fermentation as it is cruncy and juicy
White cabbage
White cabbage

Wooden disk

Fermentation disks made from wood aka "fermentation pebbles made from wood" as shown further up work very well but note that not all types of wood are compatible with food. Good wood types are:


At the beginning I used a 1 inch high disk that is a little smaller than the mouth of the jar but later I found that a 1/2 inch high disk and a smaller disk on top works better because it makes for a reservoir of brine on top of the big disk.
Wooden fermentation disk (aka fermentation pebbles)
Wooden fermentation disk (aka fermentation pebbles), made from raw wood, untreated, no glue, you just stack them, the weight on top of the lid pushes them down

The purpose of this disk is to keep the cabbage submerged in brine and away from the top of the jar. Initially there will be some small amount of oxygen at the top of the jar (between the lid and the top of the brine) because you can never really fill the jar 100%. There is usually a small air bubble at the top and you want the cabbage to stay away from that bubble.

Storing salt

Store bought salt is often in a cardboard container or in a plastic bag. The cardboard box is an insufficient barrier for humidity and the plastic bags are the cause of the microplastics found in ancient salts. Salt grains are abrasive and hard. It just takes a rattling truck to generate some microplastics during transport. Good pickling salts are Windsor pickling salt, Redmond real salt, himalayan pink salt, sea salt and kosher salts but most other salts work too.

Make sure the salt looks dry when you buy it (no big lumps in the bag or box) and transfer it at home to a glass jar with a good seal. This will keep it free flowing because humidity can not get in.

Salt stored in a glass container
Properly dried salt stored in a glass container with a proper seal will not form lumps even without anticaking agents

Vintage Canadian adds from Dominion Glass of Montreal

Some vintage adds featuring Crown Jars (click link to view photo of advertisement):
It's interesting that all those adds were about canning and not about fermentation.

Back to NPA blog index

© 2004-2024 Guido Socher